[CA11] P70R: Unable to follow tracks from Garmin MFD
|
03-10-20, 04:09 PM
(This post was last modified: 03-11-20 07:58 AM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: [CA11] P70R: Unable to follow tracks from Garmin MFD
Welcome to the Raymarine Forum codingparadox,
Updating the Evolution autopilot's software should make its communications with the current system no worse than they are at present. Performing the Pilot Factory Reset, Dockside Wizard, and cruise to determine the deviation table sensed by the EV-1 is a very simple process. While I can only respond that one of the two solutions provided will address the issue for you, I would certainly advocate updating the autopilot's software as it very early software and significant improvements have since been made to the Evolution autopilot software. Please click here to view a FAQ addressing options for updating Evolution autopilot software when the system does not include a compatible Raymarine MFD. As indicated previously, the Actisense NGW-1-STNG may be used to address the issue should the software update not do so. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] P70R: Unable to follow tracks from Garmin MFD - codingparadox - 03-10-20, 09:26 AM
RE: [CA11] P70R: Unable to follow tracks from Garmin MFD - Chuck - Raymarine - Moderator - 03-10-20, 01:41 PM
RE: [CA11] P70R: Unable to follow tracks from Garmin MFD - codingparadox - 03-10-20, 03:49 PM
RE: [CA11] P70R: Unable to follow tracks from Garmin MFD - Chuck - Raymarine - Moderator - 03-10-20 04:09 PM
|
User(s) browsing this thread: 2 Guest(s)