The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom update process

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom update process
03-11-20, 09:29 AM (This post was last modified: 03-11-20 09:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
wdbox Offline
Junior Member
**
 		Posts: 11
Joined: Oct 2017
Reputation: 0
[CA11] Axiom update process
I have two Axiom MFD's that I update as the software becomes available. I power one on and wait for the startup sequence to complete. I insert the card with the updated software and tell the unit to check. The updated software is found and the update process starts.

The problem is the update "waiting and do not turn off" message never goes away. I have left things in this condition over night and the message is still their. If I shut things down and restart the display appears to work normally and I think it is updated.

Should the update process stop once the new software is loaded. Am I doing something wrong. This problem happens on both the master and slave displays.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom update process - wdbox - 03-11-20 09:29 AM
RE: [CA11] Axiom update process - wdbox - 03-13-20, 09:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication