[CA] [CA11] Axiom update process
|
03-11-20, 10:10 AM
(This post was last modified: 03-11-20 10:11 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Axiom update process
Welcome to the Raymarine Forum wdbox,
From time to time I receive similar reports. The apparent fault may in part result from data presently in the MFD's cache memory. Please note that it is possible to force the installation of the software again. Should the software update not complete within 20 minutes when updating directly from a microSD memory card, then it would be recommended that 1) the MFD be switched OFF, 2) the microSD card containing the software update files be removed from the MFD's memory card reader 3) a Power ON Factory Reset Procedure be performed to the MFD, 4) allow the MFD to complete initialization 5) acknowledge the Limitations of Use dialog 6) insert the microSD card containing the software update files into the MFD's memory card reader 7) update the MFD's software 8) a second Power ON Factory Reset Procedure be performed to the MFD, and 9) allow the MFD to complete initialization 10) acknowledge the Limitations of Use dialog 11) that the MFD's settings be manually reconfigured, rather than be restored from a saved settings file. 12) Verify the MFD's software version via the Settings dialog (HOME->SETTINGS) |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Axiom update process - wdbox - 03-11-20, 09:29 AM
RE: [CA11] Axiom update process - Chuck - Raymarine - Moderator - 03-11-20 10:10 AM
RE: [CA11] Axiom update process - wdbox - 03-13-20, 09:21 AM
RE: [CA11] Axiom update process - Chuck - Raymarine - Moderator - 03-13-20, 09:25 AM
|
User(s) browsing this thread: 1 Guest(s)