[CA] [CA11] Help connecting HD radome and GPS

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Greenwood,

An A80227 5m, A80228 10m, A80229 15m, or A80230 25m Digital Radar Cable may be used to interface one of the MFD's Ethernent (RayNet) Network sockets the RD418HD radome. This cable features power leads which should be interfaced to a dedicated 12VDC or 24VDC switched power circuit. A VCM100 is not used in conjunction with radomes.

A powered and properly terminated SeaTalkng / NMEA 2000 backbone having a sufficient number of spur (white) sockets to accommodate each device (MFD and Raystar 150 GPS Sensor are the only items which you have listed) which will be interfaced to the backbone. The gS-Series MFD will be interfaced to the backbone via an appropriate length of SeaTalkng Spur Cable.