[CA] [CA11] i70 depth erratic from ITC-5

[jefndeb]

Hello Chuck,

So I replaced the ITC-5 this weekend and the erratic depth is no longer an issue, meaning depth no longer cycled from the actual depth to 2.1 ft every 10-15 seconds...so thats good

My goal was to have 2 independent view-able source of depth, one being the P79, via the ITC displayed, on the i70 multi display instruments, and the other source, from B744v (networked from the axiom 9 at the lower helm) being shown on the Axiom 12....

However I noticed whenever i changed the depth source (as changed from the source page on the fly bridge Axiom 12), both i70 multi displays also changed...I would like them to display the ITC-5/P79 depth...

Question...

How can I force the Axiom 12 to display the B744v depth and the i70 multi displays show the depth from the P79/ITC?...or is this not possible..

Thanks....