[TG] [TG11] No pilot - P70, acu100, ev1

[Richie-mort]

Thanks Tom,

1. It would, as you say, be a coincidence for a failure at this time. Hope not.
2. I have gone through all the connectors multiple times - have swapped them out wiht a spare etc.
3. Not sure i understand this point? I would of thought they would be made to suit outboards charging output?
4. I wired up outboard so definitely no attempt at connection engine up.
5. maybe, everything else is ok though?

* I measured pretty well smack on 60 ohms
* Yep same with engine off
* I tried this and no matter what combo i have it connected the p70r does not detect either the acu100 or ev1?

(Def a raymarine dealer....there business name comes up on start up on my E97 etc)

So my guess is best case scenario - the seatalk bridge is faulty or both the ev1 and acu100 just happen to blow at once??

One more thing i have thought of is when i towed the boat to get outboard bolted on it belted down rain....i had holes in the dash where water came through and dripped on seatalk bridge....not talking massive amounts but enough to dampen the carpet around it.

Thanks for your time.