Raymarine forum / Raymarine Forums / AIS v / [LW] [LW11] AIS700 do not send position data to DSC VHF

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] AIS700 do not send position data to DSC VHF
03-24-20, 04:03 AM
Post: #15
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] AIS700 do not send position data to DSC VHF
Dear Claus,

Thank you for your post.

At the time of connecting the AIS700 and RAY60 have you got NMEA2000 and NMEA0183 connected at the same time?

Have you got a GPS fix on the AIS700?
This is not a complaint heard of before now, can you send in a system schematic along with the software revision in each unit for me to look at, send it too [email protected]

With regards to your Axiom, this will accept GPS data from third party systems. What are you connecting on the network as a GPS source that you are not detecting on the Axiom? Are the devices listed in product info?
HOMESCREEN> SETTINGS>NETWORK> DIAGNOSTICS> PRODUCT INFO - here you should see everything available on the network.
Also have a look in data sources in the same menu - what is your selected GPS source?
What revision of Lighthouse 3 do you have installed on the Axiom, the current revision is LH3.11.42.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] AIS700 do not send position data to DSC VHF - Louise - Raymarine - Moderator - 03-24-20 04:03 AM

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication