[CA] [CA11] ST600R Autopilot remote w/ACU-200 and EVO

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum tce001,

It is recommended that you verify that the SeaTalk to SeaTalkng Converter and Evolution autopilot components have each been updated with the the latest available Raymarine product software update. Please additionally note that a system featuring an Evolution autopilot featuring an ACU must additionally include an EV-1 CCU and either a p70S/p70/p70R/p70RS Autopilot Control Head or a MFD running the latest available LightHouse 3 or LightHouse II software. Some legacy autopilot control heads (ex. ST600x, ST700x, and ST800x) may be used with Evolution autopilots command the autopilot into Auto, Track, or Standby modes. However, the legacy autopilot control heads cannot be used to configure an Evolution autopilot ... a p70S/p70/p70R/p70RS Autopilot Control Head or a MFD running the latest available LightHouse 3 or LightHouse II software would have to perform this function.

Should you have addressed the items specified above and should the problem persist, then it would indeed appear that the ST600R is not compatible with the Evolution autopilot, as the ST600R is reporting that it has been unable to establish communications with the autopilot (No Link).