Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Linear rudder reference transducer setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Linear rudder reference transducer setup
03-27-20, 03:38 PM (This post was last modified: 03-27-20 05:45 PM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Linear rudder reference transducer setup
bellinghamangler,

Within the Autopilot Calibration Menu, you will find a Vessel Settings menu and within it, you will find Calibration Lock setting. Ensure that this setting has been configured to OFF. Upon doing so, you should be able to perform the command previously specified.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Linear rudder reference transducer setup - Chuck - Raymarine - Moderator - 03-27-20 03:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication