Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Linear rudder reference transducer setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Linear rudder reference transducer setup
03-27-20, 05:41 PM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Linear rudder reference transducer setup
bellinghamangler,

The wizard is indicating that the sensed resistance from your rudder reference transducer is outside of the parameters expected by the autopilot. Please click here to view a FAQ addressing how to test the rudder reference transducer. Should testing of the rudder reference transducer not indicate any issues with the transducer, then it would be recommended that the ACU be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Linear rudder reference transducer setup - Chuck - Raymarine - Moderator - 03-27-20 05:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication