[TG] [TG11] No pilot - P70, acu100, ev1

[Richie-mort]

Tom, thank you so much for all your input and going beyond to help me with this.

Great news! I have it working!!

I again contacted my local Raymarine repairer who now advised they will bench test it if i remove the whole system and bring it in. So i removed the system and thought i'd do my own bench test first.

Only difference was where i connected power to (For seatalk AND ACU100). On install both were connected after a fused switch. For this test i connected to bus bar and presto. Obviously even though i was measuring battery voltage at devices it wasnt getting enough current. That's all i can think of anyway!

Again thank you for your time Tom. Hope this may help others.