[CA11] RS125 - No communication

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] RS125 - No communication

04-02-20, 09:01 PM

Post: #9

Zulu

Junior Member

Posts: 5
Joined: Oct 2019
Reputation: 0

RE: [CA11] RS125 - No communication

Chuck,

I found that the red lead from the Seatalk bus is spliced into the power cable for the E series classic MFD and not into the Seatalk port cable of the E series classic MFD. Is that ok or should it be powered by a separate switched 12VDC power circuit?

Regards

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] RS125 - No communication - Zulu - 03-26-20, 07:23 PM

RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-27-20, 09:00 AM

RE: [CA11] RS125 - No communication - Zulu - 03-27-20, 04:55 PM

RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-27-20, 05:59 PM

RE: [CA11] RS125 - No communication - Zulu - 03-29-20, 01:42 AM

RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-30-20, 09:29 AM

RE: [CA11] RS125 - No communication - Zulu - 04-02-20, 06:28 AM

RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 04-02-20, 08:07 AM

RE: [CA11] RS125 - No communication - Zulu - 04-02-20 09:01 PM

RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 04-03-20, 08:13 AM

User(s) browsing this thread: 2 Guest(s)