[CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone

04-06-20, 04:22 PM (This post was last modified: 04-07-20 07:16 AM by Chuck - Raymarine - Moderator.)

Post: #3

Sea Tiger Offline

Junior Member

Posts: 5
Joined: Aug 2019
Reputation: 0

RE: [CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone

Thank you, I will use "T" connector with a terminator and backbone cable. I have a follow-up question due to information I found on the forum which was confusing technically. Will a 6m spur cable replace a RS150 GPS cable? I read that they could be used interchangeably due to a person chafing the supplied GPS cable when running them through a tower. I thought the provided GPS cable was different than a spur cable?

Thank you for the technical expertise.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone - Sea Tiger - 04-01-20, 10:58 PM

RE: [CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone - Chuck - Raymarine - Moderator - 04-02-20, 09:15 AM

RE: [CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone - Sea Tiger - 04-06-20 04:22 PM

RE: [CA11] Extending RS150 GNSS Receiver Cable to SeaTalkng Backbone - Chuck - Raymarine - Moderator - 04-07-20, 07:25 AM

User(s) browsing this thread: 1 Guest(s)