[CA] [CA11] Raymarine C95 displays incorrect apparent wind speed

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jack,

Please note that interfacing the products listed would typically be accomplished fia a SeaTalk to SeaTalkng Converter Kit. That said, please click here to view a FAQ addressing how to record NMEA 0183 sentences received (RX) by the c95 MFD. When the reported problem is manifesting itself, please verify that the ST60 instrument has been configured to report apparent rather than true wind data. Please additionally ensure that the MFDs have been interfaced in a manner which would only support one way communications ... from the C-Series Classic MFD to the c95 MFD, as bidirectional NMEA 0183 communications may result in a data loop, which in turn may cause there reported symptom. If conditions have been verified and the problem persists, then use the NMEA 0183 buffer recording feature to record approximately ten seconds of data to a microSD memory card. After doing so, please attach the recorded NMEA 0183 buffer file to this thread for further analysis.