Raymarine forum / Raymarine Forums / Autopilots v / No autopilot after R17 update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No autopilot after R17 update
06-25-16, 10:34 AM (This post was last modified: 06-27-16 10:36 AM by Chuck - Raymarine - Moderator.)
Post: #9
Night Heron Offline
Junior Member
**
 		Posts: 9
Joined: Jun 2016
Reputation: 0
RE: No autopilot after R17 update
Attempted to update the ACU300, but it did not show up as an available device to be updated. Went ahead and updated the EV1 hoping that would make a difference. Of course it did not. Still getting the task fail error when i try to commission the pilot, and when i run the diagnostic - no sign of the ACU300. Checked the breaker to the drive, and it has power. Also, i did the whole process with the engines running, hoping that would help.

Is it possible that the device got fried in the update process? I think i will need to get a dealer to troubleshoot from here
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: No autopilot after R17 update - Night Heron - 06-25-16 10:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication