The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV-1 Heading Sensor not Recognized

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-1 Heading Sensor not Recognized
04-10-20, 06:50 PM (This post was last modified: 04-13-20 08:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
FluidDynamic Offline
Junior Member
**
 		Posts: 10
Joined: Jul 2018
Reputation: 0
[CA11] EV-1 Heading Sensor not Recognized
My Autopilot just quit working one day while I was using it. It displays no gps data. The red light is blinking on the EV-1 Heading sensor. I have a ACU 150 along with two axiom displays. I went on the data display and looked in the data source to look to see if the EV-1 was displayed as the data source for heading g, but it is not. I checked all wiring and everything is good. The axioms just dont recognize the heading sensor. What could be the issue? I have already upgraded the displays and I tried to upgrade the autopilot, but it doesn't give me an option because it's not recognized.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] EV-1 Heading Sensor not Recognized - FluidDynamic - 04-10-20 06:50 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication