The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] no navigation data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] no navigation data
04-12-20, 07:50 PM (This post was last modified: 04-13-20 03:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2016
Reputation: 0
[CA11] no navigation data
Hello,

I have a Raymarine L760 MFD networked to an Evolution Autopilot (p70 control head, ACU 200, EV sensor) via the Seatalk to Seatalk NG converter. When I set a goto cursor or waypoint in the MFD and attempt to go into Track mode, the P70 responds with a No Navigation Data. The Evolution was installed last December and the software for the converter updated to the latest version 2.03 at that time. I know the converter functions because the MFD shows the GPS position and speed of the vessel from a Raymarine RS130 GPS sensor attached to the SeaTalk ng bus. The P70 is also able to read the wind vane sensor interfaced to the SeaTalk bus via an ST60 Wind Instrument. I have verified that additional SeaTak data is being placed on the bus when the goto is engaged from the SeaTalk data screen (debug/test output). Also the MFD worked perfectly in track mode with the original SG1 autopilot. Please advise.

Regards,
John C.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] no navigation data - [email protected] - 04-12-20 07:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication