[CA] [CA11] AR200 Output....

[Chuck - Raymarine - Moderator]

Tim,

We're beginning to get a bit off topic here (i.e. AR200 output vs. MFD upgrade). In the future, such topic changes should be addressed within a new thread.

All devices within the specified equipment list (no fishfinder transducer listed) may either be directly interfaced to or adapted for use with any of the MFD designs which have been introduced since the C-Series Classic MFD designs. Of the MFD designs listed below, only MFDs running latest available LightHouse 3 software update (i.e. Axiom/Axiom Pro/Axiom XL MFDs or eS/gS-Series MFDs will support calibration of an AR200. From most recent oldest legacy MFDs, these include:

- Element displays (not compatible with any currently installed fishfinder transducer)

- Axiom / Axiom Pro / Axiom XL MFDs (Axiom XL MFDs would require that a CP370 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)

- ax7/cx7/e7D/ex7/eSx7 Series MFDs (not that a6x and a7x MFDs lack a NMEA 0183 communications interface)

- ax5/ax8/cx5/e7/ex5/eSx8/gS Series MFDs (would require that a CP370 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)

- E-Series Widescreen MFDs (would require that a CP370 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)

- C-Series Widescreen MFDs (would require that a CP370 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)

- A-Series Classic MFDs (includes your A50D)

- E-Series Classic MFDs (would require that a CP370 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)

- C-Series Classic MFDs (would require that a DSM250, DSM30, or DSM300 fishfinder sounder module be included within the system to support any currently installed fishfinder transducer)