[CA] [CA11] Integrating Axiom 9 with ST60 and GX1400

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum aneckar1,

Nice job with the diagram. As you have indicated therein, a pair of SeaTalkng to SeaTalkng Converters (E22158 for the VHF Radio and E70196 for the ST60 instrument) will be required. However, only one SeaTalkng Power Cable will be used. Additionally, a SeaTalk to SeaTalkng Converter Cable is supplied with the E70196 SeaTalk to SeaTalkng Converter Kit, making it unnecessary to purchase another. Indeed, should you have an engine system supporting SmartCraft communications, then a SmartCraft backbone would need to exist or be added on the engine side. The SmartCraft to NMEA 2000 Engine Gateway would then be used to interfaced the engine system to the marine electronics. An A06075 / 39.4in (1.0m) DeviceNet (F) to SeaTalkng Spur Adapter will be required to adapt the engine gateway's DeviceNet (M) plug to be mated to a spur socket within the backbone.