[CA] [CA11] Axiom 7 depth transducer.

[Chuck - Raymarine - Moderator]

Rtanner1,

Regarding the warranty registration concern, it is recommended that Raymarine's Warranty Dept. ([email protected]) be contacted on this matter. Please additionally note, that should the MFD be used within a sailing application and should the MFD be installed within a binnacle pod, then it would not be recommended that the MFD within the binnacle pod feature internal fishfinder sonar circuitry. As indicated within the FAQ found here, for those seeking fishinding sonar features, it is recommended that a compatible fishfinder sonar module(s) supporting the desired type(s) of sonar imaging be installed onboard and that the fishfinder sonar module (s) be interfaced to the system's Ethernet network switch. Doing so will eliminate having to chase a fishfinder transducer cable through a binacle tube. Alternatively, another compatible MFD having internal fishinder sonar circuitry matching the type of fishfinder sonar imaging desired may be installed in another more accessible location onboard (ex. navigation station, lower helm, etc.) and will then be interfaced the system's Ethernet network switch. The fishfinder transducer(s) will then be interfaced this second MFD's fishfinder transducer socket or to the fishfinder sonar module(s).

Accordingly, should this be a sailing application and should the MFD be installed within a binnacle pod, then it would not be recommended that a CP100 DownVision Sounder Module and a CPT-S or DownVision transducer be installed. Alternatively, an Axiom DV MFD may be installed at the navigation station below. The Axiom DV MFD would likewise CPT-S or DownVision transducer. The CP100 DownVision Sounder Module or Axiom DV MFD will be interfaced to the binnacle mounted MFD or HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable.