The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C70 Classic to Standard Horizon VHF

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C70 Classic to Standard Horizon VHF
04-17-20, 12:40 PM (This post was last modified: 04-20-20 01:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
Beneteau343 Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2020
Reputation: 0
[CA11] C70 Classic to Standard Horizon VHF
Hello,

I have the Raymarine C70 Classic MFD (with the latest software). It gets GPS from an external GPS antenna - I am not able to determine how the antenna connects, I thought it was via the NMEA 0183 port but it appears to connect via Seatalk. I also have ST70 tridata, autopilot, and wind direction, as well as Raymarine autopilot and radar.

Some device is connected to the MFD's NMEA 0183 port but I am not able to determine what it is from the cable.

I installed a Standard Horizon GX 2200 VHF last year that has GPS and AIS and has a NMEA 0183 output. Ideally, I'd like to see the VHF's AIS data on the MFD - it looks like the only connection opportunity is to connect via the MFD's NMEA 0183 port. Is that accurate? Thank you!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C70 Classic to Standard Horizon VHF - Beneteau343 - 04-17-20 12:40 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication