[TG11] e125 intergration with smartcraft

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] e125 intergration with smartcraft

04-19-20, 08:47 PM

Post: #5

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] e125 intergration with smartcraft

Hi Giuseppe,

That log doesn't contain any standard NMEA2000 engine data PGNs (127488 and 124789.) It contains a range of standard navigational (GPS, heading, rudder, cross-track error, time etc.) data PGNs and a handful of proprietary ones which all have the Raymarine manufacturer code in them (not Mercury.) Was the gateway connected/powered and the engines running at the time the log was taken? It doesn't look like you were getting any data at all from the gateway at that time.

Thanks,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.