Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] ECI-100 & STW

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] ECI-100 & STW
04-19-20, 10:35 PM
Post: #9
BernieK Offline
Junior Member
**
 		Posts: 42
Joined: Jun 2019
Reputation: 0
RE: [TG11] ECI-100 & STW
Hi Tom
One thing I forgot to say was that with engines connected directly to the MFD, the Engine Data can be selected as the Speed Through Water and it appears as zero in the data box and goes to _._ as expected when the engine is turned off.

I also obtained a Garmin NMEA 2000 Power Isolater just to make it easier. (I don't have to disconnect everything else).
cheers
Bernie
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] ECI-100 & STW - BernieK - 04-12-20, 10:55 PM
RE: [TG11] ECI-100 & STW - BernieK - 04-14-20, 12:08 AM
RE: [TG11] ECI-100 & STW - BernieK - 04-14-20, 12:54 AM
RE: [TG11] ECI-100 & STW - BernieK - 04-14-20, 10:49 PM
RE: [TG11] ECI-100 & STW - BernieK - 04-19-20, 10:15 PM
RE: [TG11] ECI-100 & STW - BernieK - 04-19-20 10:35 PM
RE: [TG11] ECI-100 & STW - BernieK - 04-21-20, 02:10 AM
RE: [TG11] ECI-100 & STW - BernieK - 04-22-20, 05:27 PM
RE: [TG11] ECI-100 & STW - BernieK - 04-28-20, 01:00 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication