The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Thermal Cameras v / Furuno compatibility with M232 Thermal Camera

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Furuno compatibility with M232 Thermal Camera
04-22-20, 09:50 AM
Post: #1
Brian - Raymarine Offline
Administrator
*******
 		Posts: 7
Joined: Mar 2016
Reputation: 0
Furuno compatibility with M232 Thermal Camera
Furuno compatibility with M232 Thermal Camera

Furuno has recently produced a software version for their NavNet MFD's that allows compatibility with FLIR's M132/232 thermal cameras. Furuno recommends that a JCU3 be installed in the system as there are certain controls not available through the Furuno GUI. However, the JCU3 will need a software update to allow for compatibility in the Furuno system; this software is currently not available but work is in progress to deliver it. In the meantime, the Furuno will perform all the major control functions of the M132/232 cameras.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Furuno compatibility with M232 Thermal Camera - Brian - Raymarine - 04-22-20 09:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication