[CA] [CA11] RV 100 transducer

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Snapper,

Any waterline referenced within the installation guide for the RV100 was made with respect to single engine installations and refers to the vessel's waterline while on plane to ensure that the transducer remains in contact with the water. For vessels equipped with twin outboards, the transducer will be installed on the vessel's centerline between the outboards as indicated within the manual. The transducer's mounting height will be such that the transducer's bottom will be at the same height or slightly lower than the bottom of the keel.