[CA] [CA11] Gs Series Issues

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum rtrafford,

Q1. Trouble is analog camera plugged into master does not appear on slaves post installation of a Flir M300c, master can see.
A1. Unlike Axiom Pro and Axiom XL MFDs, eS/gS-Series MFDs running LightHouse 3 software are not designed to encode video. Accordingly, the analog output of the M300c should be disconnected from the gS-Series MFD's Power/NMEA 0183/Video Input Cable. As the M300c is designed to support RTSP video streaming, the camera's Ethernet communications interface may either be interfaced to an available Ethernet Network (RayNet) socket of one of the system's gS-Series MFDs or HS5 RayNet Network Switch. When interfaced in this manner, all networkedMFDs within the system would then support control of the thermal camera as well as the ability to view video from the thermal camera.