The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Axiom and NMEA-0183

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom and NMEA-0183
04-24-20, 08:05 AM (This post was last modified: 04-24-20 09:25 AM by Chuck - Raymarine - Moderator.)
Post: #1
jwasko Offline
Junior Member
**
 		Posts: 30
Joined: Dec 2017
Reputation: 1
[CA11] Axiom and NMEA-0183
I am considering upgrading my LH2 e-Series system to LH3. Aside from the MFD's, the existing system also includes a SeatalkHS network switch linking radar and fishfinder and a SeatalkNG bus linking iTC-5, MFID's, VHF, GPS and a Mercruiser gateway.

Due to form factor considerations, I will probably be limited to the Axiom line (vs Pro or XL). I believe the upgrade could otherwise be accomplished by a simple swap-out of the MFD's but unfortunately I also need to maintain 2 channels of NMEA-0183 out to other equipment and 1 channel of NMEA-0183 in (all 4800 baud).

What equipment and/or setup would you recommend to implement this requirement?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom and NMEA-0183 - jwasko - 04-24-20 08:05 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication