[CA] [CA11] Gs Series Issues

[rtrafford]

BNC, I have a 1 to 4 powered BNC splitter coming that is allegedly rated for analog signal. We'll see how that goes.

HDMI: Ran HDMI from 19" Master to TV directly. No signal. Ran HDMI from slave 9". No signal. Ran HDMI from both 19" and 12" slaves on bridge, both gave signal as designed. SO, I re-routed the HDMI cable from the Bridge 19" slave to the HDMI powered splitter 1 to 8, and HDMI signal was received at all TV sets as designed. SO the HDMI issue seems to be within the two Pilot House units, master and slave. All units have the same version of LH3 installed. Otherwise, no clue, but I can be comfortable with the HDMI signal from that bridge slave station, and have thusly run the HDMI permanent install. Any thoughts as to an issue?