The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom to cpt 100 dvs transducer. Adapter needed?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom to cpt 100 dvs transducer. Adapter needed?
04-27-20, 07:04 AM (This post was last modified: 04-27-20 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
jwex16 Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2020
Reputation: 0
[CA11] Axiom to cpt 100 dvs transducer. Adapter needed?
Just installed axiom 9 and the recommended cpt100 dvs transducer. The connections are both male. Now I see there is an adapter you can buy. Is there a workaround. If I need to get the adapter I would have spent the little bit extra to get the RV 100. Where does the Ferrell go. Close to the end of the transducer cable or on the adapter cable closest to the display?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom to cpt 100 dvs transducer. Adapter needed? - jwex16 - 04-27-20 07:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication