Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS650 to C140W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS650 to C140W
04-27-20, 02:15 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AIS650 to C140W
Q1. I was totally wrong (not fully familiar with the installation yet) ... Ais-targets were not shown on E80. And it is connected via Seatalk 1. I will replace the E80 with a C90W interfaced via STNG.
A1. Noted.

Q2. The link in the instructions for updating the software for the C-series doesn’t work.
Where can I download the software (v2.35)?
A2. Please try the link again. I have verified that it is indeed operational. From Raymarine's website, software updates for the C-Series Widescreen MFDs may also be accessed by selecting SUPPORT->SOFTWARE UPDATES->MFD SOFTWARE->LEGACY MFDS->C-SERIES WIDESCREEN
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS650 to C140W - Pan76 - 04-24-20, 11:07 AM
RE: [CA11] AIS650 to C140W - Pan76 - 04-25-20, 09:21 AM
RE: [CA11] AIS650 to C140W - Pan76 - 04-27-20, 10:55 AM
RE: [CA11] AIS650 to C140W - Chuck - Raymarine - Moderator - 04-27-20 02:15 PM
RE: [CA11] AIS650 to C140W - Pan76 - 04-27-20, 02:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication