Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro speed jumps erratically

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro speed jumps erratically
04-28-20, 07:32 AM
Post: #16
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro speed jumps erratically
John,

If the Icom VHF radio has been interfaced to the system via NMEA 0183 communications, then please indicate whether the Icom VHF radio interfaced to the system in a manner which would support bidirectional communications ... or has it been interfaced in a manner which would support only one-way communications? The reason for asking is that Icom VHF radios have had a history of looping received NMEA 0183 data ... which could explain the reported symptom. If uncertain, please attempt to duplicate the problem when the VHF radio has been switched OFF for at least five minutes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro speed jumps erratically - Chuck - Raymarine - Moderator - 04-28-20 07:32 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication