Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly 6 Sonar/DV blank

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 6 Sonar/DV blank
06-27-16, 03:10 PM (This post was last modified: 06-27-16 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dragonfly 6 Sonar/DV blank
Welcome to the Raymarine Forum Robbie,

Was the actual depth of water (below the transducer) being navigated within the range 3'-600' when the problem was observed? Does the problem occur when the vessel is not being propelled through the water? If the answer to both of these questions is "yes", then it would unfortunately appear that there is a problem with your Dragonfly display's fishfinder circuitry, necessitating that it be bench checked / serviced by Raymarine’s Product Repair Center.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Dragonfly 6 Sonar/DV blank - Rbmoomba - 06-26-16, 08:02 PM
RE: Dragonfly 6 Sonar/DV blank - Chuck - Raymarine - Moderator - 06-27-16 03:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication