The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AxiomPro crashing on selection of RealVision
04-29-20, 03:01 PM (This post was last modified: 04-29-20 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AxiomPro crashing on selection of RealVision
I have a pair of AxiomPro 12 RVXs installed in a LE Patrol Boat. Today one of the units crashed multiple times, rebooting only to crash again. It seems the crash is associated with attempting to start RealVision. I tried sonar, DownVision and SideVision with no problems. My initial crash came when starting RealVision/Sonar/DownVision combo. I tried several combination with Sonar, DownVision and SideVision specifically avoiding RealVision and had no crash. If i tried to start RealVision alone or in any combo screen, the unit would crash. This appears to affect only the remote (Non-Data Master) Display. The Data Master unit appears to operate normally. The unit (both of them) have worked without any problems for 600+ hours.

Here's a quick view of my system mounted in a 31' Full Cabin SAFE Boat

NEMA 2000 Gateway, Prod Name: 6Y9-8A2D0-20 Ver: YhaN2k0-33
AIS5000, Prod Name: A80601, Ver: 01-11-00, CAN Address: 2b
CAM210IP, Prod Name: CAM210IP, Ver: 1.1.7.2 20160404 IP Address: 10.22.2.112
GPS, RS130 GPS, Prod Name: E32153, Ver: 2.20, CAN Address: 82
Radar 4kw 24", Prod Name/ID: E92131, FPGA Ver: 0.0 IF Board ver: 1.04 Mod Board Ver: 21.02, IP Address 10.18.148.166
FLIR M-625L Dual Load Camera
Heading Sensor: KVH Autocomp 1000
Transducer: Axiom RV-300 All-In-One plastic
HS5 - Network Switch (AxiomPro DM, AxiomPro Remote, Radar, CAM210IP.
SeaTalk Ng - AIS5000, GPS, Autocomp 1000, Yamaha Gateway


Current Available Software Version: v3.10.42 - Bermuda ?????????

2 Axiom Pro 12 RVX Displays Remote and Data Master) Data Master is flush mounted in console, Remote is open gimbal mount. Both inside enclosed cabin.

Axiom Pro 12 RVX(Remote - Open Mount) E70372 0497467
Prod Name: AxiomPro 12 RVX, App Ver: 3.10.127
CPU revision: r1.7 P/N: 1006188 variant: 3
Hardware revision: Carrier:5 Main:1
Current/Voltage Supply: 1.2A and 14.2V
System Up Time: 622 hours
Cartography: 1.22-00029
Software CMAP Library version: CI-2.0.0R SDK-15.0.0R (04/09/2017)
Crash Logs: 15
Kernel version: 3.10.0 (Fri Jul 26 05:23:29 BST 2019)
Navionics Library: NI_01.03.40.23_UV_2339_CI_03.11
Platform version: 3.10.2
Power Micro version: 0.39 Hardware: 4
Product Bundle version: 3.10.42
Sounder Info
Application Version: 3.10
IP Address: 10.10.241.27
Product Temperature
CPU Die: 100
GPU Die: 96.8
PSU: 99.4
Network
Link Status: up
MAC Address: 00:11:c7:0a:f1:1b
Subnet Mask: 255.224.0.0


Axiom Pro 12 RVX(DM - Console Mount) E70372 0893491
Prod Name: AxiomPro 12 RVX, App Ver: 3.10.127
CPU revision: r1.7 P/N: 1006188 variant: 3
Hardware revision: Carrier:5 Main:1
Current/Voltage Supply: 1.2A and 14.2V
System Up Time: 547 hours
Cartography: 1.22-00029
Software CMAP Library version: CI-2.0.0R SDK-15.0.0R (04/09/2017)
Crash Logs: 3
Kernel version: 3.10.0 (Fri Jul 26 05:23:29 BST 2019)
Navionics Library: NI_01.03.40.23_UV_2339_CI_03.11
Platform version: 3.10.2
Power Micro version: 0.39 Hardware: 4
Product Bundle version: 3.10.42
Sounder Info
IP Address: 10.2.58.219
Product Temperature
CPU Die: 126
GPU Die: 122
PSU: 124
Network
Link Status: up
MAC Address: 00:11:c7:02:3a:db
Subnet Mask: 255.224.0.0
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AxiomPro crashing on selection of RealVision - john744 - 04-29-20 03:01 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)