Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11]Seatalk Failure

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11]Seatalk Failure
05-05-20, 04:22 AM
Post: #8
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11]Seatalk Failure
Hi Michael

Thanks for the feedback,

It depends how you are attaching the other displays to the control unit, if you have used a faulty cable then this could be the cause, otherwise, if you have discounted the cables being used to attach the other displays, then the issue must be in the cable attached to the control unit that is being used to connect the other display or the control unit itself.

You could eliminate the cable on the control unit by connecting the other SeaTalk device direct to the second SeaTalk connection on the course computer whilst leaving the control unit connected.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11]Seatalk Failure - Derek - Raymarine - Moderator - 05-05-20 04:22 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication