Replacing s2 with ev-200

[riptyler]

There seemed to be an implication that only one E80 can be connected to the bus "connect the master" - is that the case?

Both are also connected via HS, as is the DSM (which I may deep 6) and HD Radome. I like being able to change masters on the fly so as not to have to go to the flybridge in bad weather to turn on the master.

I had planned to have the ST - STNG kit at the lower station with the ST bus cable (connected terminal strip with all the ST devices that are presently wired to the s2) and the lower E80. Then extend the backbone to the FB and add a 5 way connector there (just for the E80 and the p70).

Thanks,
Rip