Raymarine forum / Raymarine Forums / Autopilots v / EV-100 Deviation Change with R17

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-100 Deviation Change with R17
06-28-16, 09:18 AM (This post was last modified: 06-28-16 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #12
mswanicke Offline
Junior Member
**
 		Posts: 34
Joined: Mar 2016
Reputation: 0
RE: EV-100 Deviation Change with R17
I did the factory reset as instructed. I performed the dockside wizard at which time the "detecting magnetics" appeared on the control head. I completed the test drive when the "detected magnetics" notice on the control head reported "magnectics successfully detected and maximum deviation is 1 degree". I look in the Setup/Diagnostics/about pilot and the deviation is 39. I performed this sequence several times with similar results. Should not the value the new "detecting magnectics" feature reports be the same as in the Setup/Diagnotics/about pilot? The difference between the boats compass and the autopilot seems to be only about 4 degrees.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: EV-100 Deviation Change with R17 - mswanicke - 06-28-16 09:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication