Itc-5 connection as a spur

[Artboas]

Chuck,
I’ve had an itc-5 since inception, and it is terrific.
Owing to an instrumentation upgrade, I needed to relocate the itc-5, and I’ve got it connected as a spur on a 1m cable.
It’s running fine, as I suspected it would. Of course the backbone is all legal with 2 terminators, etc.
So, my question is, do you foresee any issues hanging the ITC-5 on a short spur? Obviously, the spur & backbone are electrically equivalent, being a pass-through system. So, your opinion would be appreciated .
Many thanks