Itc-5 connection as a spur

[Artboas]

Chris,
This wasn’t quite my question..
In all the documentation, it shows the backbone running through the itc-5.
That’s not how I have it currently installed. I have a 1m Spur cable connected to a T junction, which then is plugged into the white spur connector on the itc-5. There is no backbone connected to the itc-5
It is working fine, but I just wanted to ensure my setup wouldn’t be flaky,
I don’t see any electrical reason why this shouldn’t be ok, but wanted to verify.
Thanks so much

Arthur