The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] COG data (NMEA 0183) for my FloScan

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] COG data (NMEA 0183) for my FloScan
05-17-20, 08:41 PM (This post was last modified: 05-20-20 09:22 PM by Tom - Raymarine - Moderator.)
Post: #1
HighCs Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
[TG11] COG data (NMEA 0183) for my FloScan
I have a flybridge and a lower helm station. The fly bridge has a fuel flow meter (FlosScan 9000) that provides not only GPH but MPG as well if it receives data from NMEA0183. I recently upgraded from the A60 to the Element 9s which has NMEA2000 and not NMEA0183. Short of purchasing a gateway device to make this work can I simply run a cable from the A60 I still have on the lower helm to the flowmeter on the upper helm (about 12’ of run to get there) and if so is there a cable this long to do it. The only cable I have found is 1.5 meters.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] COG data (NMEA 0183) for my FloScan - HighCs - 05-17-20 08:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication