[TG] [TG11] a65 Questions

[Tom - Raymarine - Moderator]

Hello Tim,

We've already discussed the LH3 and screen mirroring on your other post (if you can avoid asking the same question multiple times, that will help us use our finite resources more effectively), but on your other questions:

Quote:I am about to remove the Gyro Compass and SHS unit as I can now use the T070 for my compass input to the plotter...

The Smart Heading Sensor (SHS) will provide better quality heading data than the T070. It's a rate-gyro stabilised, 10Hz heading output as opposed to the T070's unstabilised fluxgate.

Quote:I also have a AIS250 unit to fit at some point.

Are you sure you want to do that? AIS250 was almost a decade ago, and only has NMEA0183, no NMEA2000 / SeatalkNG, so you would need a 3rd-party NMEA0183<->NMEA2000 interface (that support 38.4k AIS) to connect it to an a-Series which has no 0183. I would not recommend spending time and money trying to do that integration now, I would get a (more) modern AIS that supports NMEA2000.

Regards,
Tom