Axiom 9 Pro integration question

[ktyminski]

Just wanted to confirm I have it right.....

1) The ST40 is connected to the Type 100 Course Computer using 1 of the Seatalk Connections.

2) The ST6001 is connected to the Type 100 Course Computer using 1 of the Seatalk Connections. The other Seatalk connection on the ST6001 is connected to the Seatalk to SeatalkNG converter using the supplied cable that came with the converter.

3) The terminators that came with the Seatalk to SeatalkNG converter are installed in the 2 end ports on the converter. The power cable that came with the converter is on one of the white ports on the converter and connected to 12 volt source. The spur that cable that came with the converter is plugged into the other white port on the converter and connected to the Axiom 9 Pro RVX.

4) The adapter A80496 will be used to connect the B256 to the Axiom 9 Pro RVX.

5) The VHF NMEA0183 +/- output cable will be connected to the NMEA0183 input cables on the the Axiom 9 Pro RVX