The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / NMEA 0183 Data Rate on RL80C?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA 0183 Data Rate on RL80C?
05-24-20, 01:37 PM
Post: #1
scooper321 Offline
Junior Member
**
 		Posts: 17
Joined: Jan 2019
Reputation: 0
NMEA 0183 Data Rate on RL80C?
I know it’s old. But it works. And it’s the only place I can pick up an NMEA 0183 output to connect to my non GPS VHF. But I can’t find the output data rate specified for NMEA 0183 for the RL80C. I need 4800 baud. That’s what my VHF needs. Had it connected to my AIS transponder before realizing that only outputs 38400 baud. Ugh.

So... does the RL80C output NMEA 0183 at 4800 baud? Please say yes...
-Steve

2003 Sea Ray 400DB
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA 0183 Data Rate on RL80C? - scooper321 - 05-24-20 01:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication