[TG] Raymarine Element conecting to wifi.

[Tom - Raymarine - Moderator]

Hello Rytis,

You can get the ice-fishing profile in the display either by

• doing a Factory Reset on the display and selecting ice fishing on the second step of the Setup wizard
• selecting the Ice Fishing demo option in Home > Settings > Demo Type
  

On the GPS data: I can understand that you would have very high SOG data when your GPS HDOP is high and accuracy is low, as in Screenshot008. When you have an inaccurate GPS fix your calculated position wanders and the system thinks that you are moving between locations, sometimes at high speed. What I don't understand is why you would have high SOG when your position data is as accurate in Screenshot009 (HDOP of 0.9, accuracy of 2.5m.) Were you seeing high SOG at the time when you took that screenshot?
If we compare those two screenshots and look at where the satellites are in the sky and their signal levels, it looks like you have better signal levels on a number of satellites in 009 than 008, and in particular in 008 you have very poor signal levels between the NNE and SW directions. Can you tell me what was different between when those screenshots were taken, and what might have been blocking the view of the satellites to the NW?

Regards,
Tom