The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] Integrating Axiom 7 with ST60+ Instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Integrating Axiom 7 with ST60+ Instruments
06-01-20, 09:40 PM (This post was last modified: 06-11-20 01:03 AM by Tom - Raymarine - Moderator.)
Post: #1
phyc278 Offline
Junior Member
**
 		Posts: 7
Joined: May 2018
Reputation: 0
[TG11] Integrating Axiom 7 with ST60+ Instruments
I have a new Axiom 7 (without sonar) for my sailboat. I have existing ST60+ instruments: Wind and Close-Hauled, Graphic Display, and Tridata. Also an ST2000 Tiller Pilot with it's own power. All ST60+ and the tiller pilot devices are connected with Seatalk 1, which fills all Seatalk 1 female outlets on the ST60+ instruments with one outlet providing power. I have ordered a E22158 SeaTalk1 to SeaTalkng converter kit to bridge my ST60+ devices with the Axiom. In order to plug the converter into the ST60+, I'll need to remove the power connector from my current Seatalk network. The Axiom has a power cable and the converter kit comes with a power. How do I power the ST60+ devices and the Axiom with this configuration?

Regards,
Jeremy
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Integrating Axiom 7 with ST60+ Instruments - phyc278 - 06-01-20 09:40 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication