[TG] [TG11] Integrating Axiom 7 with ST60+ Instruments

[hubesail]

I have a similar but more complex problem integrating two new Axiom Pro MFDs to a group of older ST-60 instruments. There are 7 SeaTalk instruments plus a 400G autopilot and S7001 Head.

I understand that power should only come from SeaTalk or SeaTalkng, and not both. I also read that if there are more than 5 SeaTalk instruments, then the SeaTalk network should get power at both ends of the loop via a 5 amp fused connection.

So, in this configuration should I apply power to both ends of the SeaTalk network and then let SeaTalk provide the power to SeaTalkng?

Thanks, Hubert Hopkins