Raymarine forum / Raymarine Forums / Autopilots v / ST6001+ NMEA and HSB2 SeaTalk interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST6001+ NMEA and HSB2 SeaTalk interface
07-06-16, 08:59 PM
Post: #5
Greg Lee Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2016
Reputation: 0
RE: ST6001+ NMEA and HSB2 SeaTalk interface
Hi Chuck,
Another question? I'm wiring the new AIS transponder. It has a dedicated GPS receiver/antenna. This particular transponder (Vesper XB-8000) connects to the ship's PC via USB. Data generated by the AIS and PC is mutiplexed and available via the transponder's NMEA 0183 output. It is my plan to feed this data to the ST-6000+ to command navigation via one of the methods you suggested. Here's my question. Can I leave the existing, Raymarine GPS connected? If so, how are conflicts between the Raymarine GPS and Vesper GPS reconciled (or is there even an issue)?
Your thoughts?
Greg Lee
Huntington Beach, CA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001+ NMEA and HSB2 SeaTalk interface - Greg Lee - 07-06-16 08:59 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication