Raymarine forum / Raymarine Forums / AIS v / AIS 650 with Plotter E80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS 650 with Plotter E80
07-08-16, 07:57 AM (This post was last modified: 07-08-16 07:58 AM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS 650 with Plotter E80
Frederico,

As indicated within my initial response, there is no other way to interface an AIS receiver / transceiver to an E-Series Classic MFD. We have a limited number of scrapped (new) R08004 MFD NMEA 0183 Cable. Should the authorized Raymarine dealer contact me via the Forum then I will provide the dealer with this cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
AIS 650 with Plotter E80 - Fedekat - 06-30-16, 04:18 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-05-16, 09:59 AM
RE: AIS 650 with Plotter E80 - TimDV - 03-09-18, 12:29 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-06-16, 10:42 AM
RE: AIS 650 with Plotter E80 - Fedekat - 07-07-16, 07:49 PM
RE: AIS 650 with Plotter E80 - Chuck - Raymarine - Moderator - 07-08-16 07:57 AM
RE: AIS 650 with Plotter E80 - Fedekat - 07-11-16, 12:27 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-13-16, 09:45 PM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication