The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / DSM 300 software update with A98 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 software update with A98 MFD
07-17-16, 10:16 AM
Post: #1
dhill67 Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2016
Reputation: 0
DSM 300 software update with A98 MFD
I followed the Raymarine instructions for updating the DSM 300 using my A98 MFD. Install the mSD card. Start the MFD and get an error message that says; "set the target device, then reboot." I can't find any instructions or information on how to "change the target device" on the A98. When I reboot, with the card out, I can check the DSM through the system settings, maintenance, device list, and see the DSM reporting that it is running software version 3.16. The lasted version is 4.2. Any ideas or suggestions? I am running Lighthouse v17 and downloaded the correct version per the RM website.

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 software update with A98 MFD - dhill67 - 07-17-16 10:16 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication