Raymarine forum / Raymarine Forums / Networking / System Integration v / Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
07-18-16, 08:29 AM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
pfaffk
Good Morning Chuck,

Q: I am also starting the design for connect my Seatalk 1 instruments to N2K backbone, and I have a question regarding connecting the ST-STng Converter to the backbone. You stated

"Maretron offers field installable DeviceNet M/F plug which may be installed on the SeaTalkng backbone cables to permit one end of each cable to be mated to Maretron backbone".

Does this statement imply that one needs to cut one end of the SeaTalkng Backbone Cable and field install a Maretron connector?

A: Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - Chuck - Raymarine - Moderator - 07-18-16 08:29 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication