Raymarine forum / Raymarine Forums / Multifunction Displays v / importing .gpx to MFD

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
importing .gpx to MFD
07-27-16, 10:22 AM (This post was last modified: 07-27-16 10:25 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: importing .gpx to MFD
Ron,

As suspected, the GPX files include waypoint names which violate of the constraints referenced within this thread. As an example, there are several waypoint names within the Waypoints.gpx file which exceed the 16 character maximum for waypoint names. This was quickly and easily verified using GPS Utility to open the GPX file and then adjusting the column width of the Waypoint Name column to 16 characters.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
importing .gpx to MFD - rltrbill - 06-07-16, 10:25 AM
RE: importing .gpx to MFD - Chuck - Raymarine - Moderator - 07-27-16 10:22 AM
RE: importing .gpx to MFD - mezrich - 07-04-17, 02:37 PM
RE: importing .gpx to MFD - mezrich - 07-05-17, 07:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication